simplebooklet thumbnail

Hot Sheet March 2019

PRODUCT HIGHLIGHT
Stay connected to us!
FLUID POWER
SERVICE THAT WORKS®
Ed. 19 Vol. 4
ET1187
PORTABLE VARIABLE CRIMP MACHINE
Part # Description
897.1187.1 ET1187 Bench Mount Machine (No Pump)
897.1187.2 ET1187 Truck Mount Machine (No Pump)
897.1187.3 ET4020TP-0002- Die Package for -4 through -16
Braided and -6 through -12 Spiral (Includes M150,
M180, M210, M240, M280, M320, M370 Dies)
897.1187.4 FT1380-200-M420 Die for -16 Spiral
897.1187.001 ET1000PK-001 2 Stage Hand Pump
897.1187.002 ET1000PK-002 Air/Hydraulic Pump
897.1187.003 ET1000PK-003 110 Volt Electric Pump
897.1187.004 ET1000PK-004 12 Volt DC Electric Pump
Color coded collar for core hose products makes setup fast and easy
Capacity: Weatherhead Z series ttings and applicable hoses in sizes 1/4” through 1“
Weatherhead TTC12/4S ttings and applicable hoses in sizes 3/8” through 5/8”
Weatherhead 4S ttings and applicable hoses in sizes 3/4” through 1”
Pump Kit: Includes the pump, connecting hose assembly, and all of the adapters
necessary to connect the pump to the ET1187 Machine
897.1187.1
897.1187.2
Part No.
Per Foot Eaton No.
Hose
I.D.
Hose
O.D.
Work Press.
(PSI)
Min. Burst Press.
(PSI)
Min. Bend
Radius
897.280.4.1 H28004 1/4” 17/32” 6500 26000 2.00
897.280.6.1 H28006 3/8” 11/16” 5300 21200 2.50
897.280.8.1 H28008 1/2” 13/16” 4500 18000 3.50
897.280.10.1 H28010 5/8” 15/16” 4000 16000 4.00
897.280.12.1 H28012 3/4” 1-3/32” 3500 14000 4.75
897.280.16.1 H28016 1” 1-13/32” 3000 12000 6.00
897.280.20.1 H28020 1-1/4” 1-13/20” 2500 10000 8.25
897.280.24.1 H28024 1-1/2” 2” 2000 8000 10.00
897.280.32.1 H28032 2” 2-1/2” 1600 6400 12.50
H280 WEATHERSHIELD™ HYDRAULIC HOSE SAE 100R16
Inner Tube: Synthetic Rubber
Reinforcement: 2 Steel Braids
Cover: WeatherSHIELD Synthetic rubber cover
Temp. Range: Petroleum-based Hydraulic Fluids
-40
C to +127
C (-40
F to +260
F)
Water-based Hydraulic Fluids: -40
C to +70
C
(-40
F to +158
F)
Hose Ends: C-O-C ‘Z’ Series
Typical Application: Hydraulic system service with
petroleum and water-based uids, for general
industrial service
MSHA accepted
2
Service That Works... Products That Perform
FASTENERS
INCH THREADSERT® KIT ALUMINUM
Part No. Kit Contents:
947.250 Aluminum inserts and
threadsetter tool
Includes Inch Sizes: 6-32 thru
3/8-16
Part No. Item
946.6.32 6-32 Threadserts
946.8.32 8-32 Threadserts
946.10.24 10-24 Threadserts
946.10.32 10-32 Threadserts
946.14.20 1/4”-20 Threadserts
946.516.18 5/16”-18 Threadserts
946.38.16 3/8”-16 Threadserts
947.0701 6-32 Mandrel
947.0702 6-32 Nosepiece
Part No. Item
947.0703 8-32 Mandrel
947.0704 8-32 Nosepiece
947.0705 10-24 Mandrel
947.0706 10-32 Mandrel
947.0707 10-24/10-32 Nosepiece
947.0708 1/4”-20 Mandrel
947.00709 5/16”-18 Mandrel
947.007010 3/8”-16 Mandrel
947.0700 Threadsert Tool
Kits come complete with mandrels
Mandrels also available separately
For nut sert, threadserts and rivet nut
installations (see tool application chart)
Pulls steel and aluminum inserts
NUTSERT SETTING TOOL E AND F
Part No. Mandrels
947.801 6-32
947.802 8-32
947.803 10-24
947.804 10-32
947.805 1/4-20
947.806 *5/16-18
947.807 *3/8-16
Part No. Description
947.800 Inch Kit (E)
(Includes these mandrels:)
*For pulling aluminum inserts only
Part No. Mandrels
947.852 M4
947.853 M5
947.854 M6
947.855 *M8
Part No. Description
947.850 Metric Kit (F)
(Includes these mandrels:)
NUT SERTS  KNURLED LARGE FLANGE
METRIC SIZES
L
D
Completed Application
F
INCH SIZES
*See threaded insert tool section
THREAD REPAIR  THREADSERTS®
A
D
Completed Application
Winzer Threadserts® are designed to install threads into any thickness of
stock, including metal, plastic, berglass, or any rigid material. Ideal for
solid stock applications
U.S. THREADS
Materials: Aluminum and Steel
*See threaded insert tool section
Part No.
Thread
Size
Grip
Range
Hole
Size ‘D’ ‘F’ L’
Installation
Tool*
943.5010 6-32 .020-.080 17/64 .265 .375 .460 A,B,E
943.5020 8-32 .020-.080 17/64 .265 .375 .460 A,B,E
943.5030 10-24 .020-.130 19/64 .296 .400 .515 A,B,C,E
943.5040 10-32 .020-.130 19/64 .296 .400 .515 A,B,C,E
943.5050 1/4-20 .027-.165 25/64 .390 .500 .620 A,B,C,E
943.5060 1/4-28 .027-.165 25/64 .390 .500 .620 A,B,C,E
943.5070 5/16-18 .027-.165 17/32 .530 .670 .735 C
943.5090 3/8-16 .027-.165 17/32 .530 .670 .735 C
Material: Type C-1010/C-1008 Steel
Plating: Yellow Zinc
POP® Rivet Nuts are ideal where irregular holes are a problem. The
large ange construction combined with the axial knurls on the
body ensure a torque-resistant t
Large Flange Head
Knurls create high torque-out valves and resist spinning due to
cross-threading or over tightening
Blind installation - no access to backside required
Outer ange is nearly ush with surface when installed
Open end
Aluminum
Part No. Steel Part No.
Thread
Size Hole Size
Drill
Hole ‘D’ ‘A’
Installation
Tool*
946.6.32 946.06.32 6-32 .221 #2 .215 .375 A,B,E
946.8.32 946.08.32 8-32 .250 1/4 .246 .375 A,B,E
946.10.24 946.010.24 10-24 .2812 9/32 .277 .375 A,B,C,E
946.10.32 946.010.32 10-32 .2812 9/32 .277 .375 A,B,C,E
946.14.20 946.014.20 1/4-20 .3906 25/64 .372 .510 A,B,C,E
946.516.18 946.0516.18 5/16-18 .500 1/2 .496 .615 C
946.38.16 946.038.16 3/8-16 .5625 9/16 .559 .740 C
Part No.
Thread
Size Grip Range Hole Size ‘D’ ‘F’ L’
Installation
Tool*
943.5110 M4 x .7 .5mm - 2mm 6.75mm 6.73mm 9.91mm 10.67mm A,F
943.5120 M5 x .80 .5mm - 3.3mm 7.6mm 7.55mm 10.10mm 13.10mm A,B,D,F
943.5130 M6 x 1.0 .7mm - 4.2mm 10.0mm 9.90mm 12.7mm 15.75mm A,B,D,F
943.5140 M8 x 1.25 .7mm - 3.8mm 13.5mm 13.45mm 17.0mm 18.65mm D
943.5150 M10 x 1.50 .7mm - 1.50mm 13.50mm 13.45mm 18.8mm 21.60mm D
Blind installation - no access to backside required
Finished repair is nearly ush with surface
Thread Sert® kit available: Part No. 947.250
Open end
3
Service That Works... Products That Perform
ELECTRICAL
FRONT VIEW
magnet
work light
tilting base
spot light
BACK VIEW
tilting base
spot light
magnet
pocket clip
Part No. Description
771.6.918 1/8” Polyolen Dual Wall Heat Shrink Tubing, 6” Black
771.6.9181 1/8” Polyolen Dual Wall Heat Shrink Tubing, 6” Red
771.6.9316 3/16” Polyolen Dual Wall Heat Shrink Tubing, 6” Black
771.6.93161 3/16” Polyolen Dual Wall Heat Shrink Tubing, 6” Red
771.6.914 1/4” Polyolen Dual Wall Heat Shrink Tubing, 6” Black
771.6.9141 1/4” Polyolen Dual Wall Heat Shrink Tubing, 6” Red
771.6.938 3/8” Polyolen Dual Wall Heat Shrink Tubing, 6” Black
771.6.9381 3/8” Polyolen Dual Wall Heat Shrink Tubing, 6” Red
771.6.912 1/2” Polyolen Dual Wall Heat Shrink Tubing, 6” Black
771.6.9121 1/2” Polyolen Dual Wall Heat Shrink Tubing, 6” Red
771.6.934 3/4” Polyolen Dual Wall Heat Shrink Tubing, 6” Black
771.6.9341 3/4” Polyolen Dual Wall Heat Shrink Tubing, 6” Red
771.6.910 1” Polyolen Dual Wall Heat Shrink Tubing, 6” Black
771.6.9101 1” Polyolen Dual Wall Heat Shrink Tubing, 6” Red
HEAT SHRINK TUBING
771.6.9181771.6.918
A exible alternative to heavy wall tubing for light duty applications
Provides environmental and ame retardant protection for electrical and electronic connections
Ideal for a variety of applications including automotive, truck, and marine harnesses
Polyolen material with sealant
Pre shrink I.D. 1/8” Max
Recovered I.D. .040”
6 Inch black
Pre shrink I.D. 1/8” Max
Recovered I.D. .040”
6 Inch red
NEW
NEW
Part No. Description
556.20.1214 Female Quick Disconnect
for 1/4” Tab Brazed Barrel
Uninsulated 12-10 AWG
TERMINALS NONINSULATED BRAZED BARREL
Part No. Description
556.30.1214 Male Quick Disconnect
for 1/4” Tab Brazed Barrel
Uninsulated 12-10 AWG
Female Quick Disconnect
Mates with 556.30.1214
Quick Disconnect Receptacle for 12-10 AWG
.250 x .032 Tab Size
Uninsulated
Brazed Barrel
Brass / Matte Tin Plate
Male Quick Disconnect
Mates with 556.20.1214
Quick Disconnect Tab for 12-10 AWG
.250 x .032 Tab Size
Uninsulated
Brazed Barrel
Brass / Matte Tin Plate
Part No.
715.2688
ARMOR 3 LED FLASHLIGHT
Toughest light, period!
Indestructible 66 foot drop tested
Waterproof and oats
360 lumen work light and 160
lumen spot light
Magnetic tilting base
Steel pocket clip
Powered by 3 AAA batteries
(included)
5.75” height x 2.45” wide x 1.25”
deep, .43 lbs
Part No.
Nominal Size Wall Thickness
Color
Reel Length
In. mm. In. mm. Ft. M
767.02.0250 1/4” 6.4 .025” .64 Black 100’ 30.5
767.02.0500 1/2” 12.7 .025” .64 Black 75’ 22.9
767.02.0750 3/4” 19.1 .025” .64 Black 50’ 15.2
767.02.1000 1” 25.4 .038” .97 Black 50’ 15.2
Material: PET (Polyester)
Flammability: UL 94-V0
Operating Temperature: -94°F to 257°F (-70°C to 125°C)
Melt Point: 482°F / 250°
Abrasion Protection: Medium
Recommended Cutting: Hot Knife
Halogen free
SPLIT WRAP BRAIDED SLEEVING
A bundling and protection option with a lateral split and a semi-rigid braid conguration that
is the ideal solution for circumstances where ease of installation is the primary concern. The
lateral split allows the sleeving to open up to adjust to the bundling requirement while the
25% edge overlap folds back over the connector or splices.
4
Service That Works... Products That Perform
ELECTRICAL
CHEMICALS
SHOP SUPPLIES
THREAD SEALANT TAPE
Medium density thread sealant tape with PTFE
Lubricates, protects and seals threads
Thread sealant tape makes it easier to assemble or
disassemble threaded ttings, without the risk of
system contamination
Tape Thickness: 4mil
Standard Density: 0.28 gm/cm3 – 100% virgin PTFE
Temperature range: 375°F to 500°F
Import
Part No.
USA
Part No. Size
888.2601 888.26012 1/2" x 260"
888.26011 888.260112 1/2" x 520"
888.2602 888.26022 3/4" x 520"
888.2605 888.26052 1" x 260"
Meets USDA and FDA requirements
Meets MIL-T-27730A
Temperatures from -450°F to +550°F
YELLOW GAS LINE PTFE TAPE
Part No. Size
888.4633 1/2” x 260”
888.4634 3/4” x 260”
Part No. Description
715.10.0135 Intrinsically Safe Dual-Light™ Flashlight
Market Applications: Hazardous work environments, re,
rescue, industrial and automotive
Certications: CE, cETLus, ATEX, IECEX, NFPA 1971-8.6 (2013)
Case Material: Glass-lled nylon polymer
Lumens/Run Time: Flashlight/High: 120L, 24 hrs run time
Floodlight/High: 120L, 24 hrs run time
Dual-Light: 120L, 24 hrs run time
Candela Flashlight: High: 3,100
Beam Distance: Flashlight: High: 111m
Water Rating: IP-67 (dustproof and waterproof)
Drop Rating: 2 m
Dimensions
Length: 6.25” (159 mm)
Barrel Diameter: 0.86” (22 mm)
Bezel Diameter: 2.1” (53mm)
Weight: 4.1 oz (116 g)
(with batteries)
Battery: 2 AA batteries
(not included)
Warranty: Limited lifetime warranty
What’s Included:
XPP-5414GX
Flashlight
Removable/reversible pocket clip
Instruction manual
INTRINSICALLY SAFE DUALLIGHT™ FLASHLIGHT
24 oz
Made of 4 ply highly absorbent, long
wearing yarns
Mops are sewed 2 times
Band is 1-1/4” wide
Cotton = better absorbency
Rayon = better durability
32 oz
Part No. Description
691.4724 24 oz Cotton
691.4732 32 oz Cotton
691.4824 24 oz Rayon
691.4832 32 oz Rayon
COTTON AND RAYON MOP HEADS
MPS 100
MULTI PURPOSE SOLVENT
(Not for Sale or Use in California)
Highly concentrated, non-chlorinated solvent blend that
can be used for a wide range of applications
For special cleaning applications and safe use on painted
surfaces, exible plastics, berglass, rubber and vinyl
Removes oil, grease and other contaminants
Leaves no residue
Applications: Vehicle exteriors and interiors, boats,
plastic trim, moldings and painted metals
Part No. 12 Pack
Net
Weight
Can
Size
891.5020 891.5020.1 14 oz (397 g) 20  oz
Concentrated all purpose cleaner
Spray and wipe
Light-duty to heavy soil
Removes grease, ink, crayon, pencil, lipstick, greasy
food, smoke lm and much more
No excess scrubbing
No rinsing
No residue
Cleans deep, cuts through and lifts soils
ISI POLY FASTBALL
HEAVY DUTY ALL PURPOSE CLEANER AND DEGREASER
Part No. Package
991.51486 1 Quart
991.51486.1 12 x 1 Quarts
991.51487 1 Gallon
991.51487.1 4 x 1 Gallons
991.110941 5 Gallon
For painted surfaces, walls, oors, counters, vinyl,
oce equipment, utensils, range hoods, truck
exterior and interior, berglass, aluminum and
much more
Dilution: Heavy-duty: 1:2 Light-duty: 1:3
Fragrance: Pine
VOC regulations apply. See label for minimum
dilution requirement
Cleans grease and heavy oil deposits from
most surfaces
Drain cleaner and grease trap maintainer
Deodorizer
Concentrated
Non-butyl, non-corrosive, non-ammable,
no petroleum distillates
Contains D-limonene
ISI POLY ORANGE 40
NATURAL CITRUS WATER BASED CLEANER AND DEGREASER
Part No. Package
991.51641 1 Quart
991.51641.1 12 x 1 Quarts
991.51640 1 Gallon
991.51640.1 4 x 1 Gallons
991.51640.5 5 Gallons
Will dull some oor seals, nishes and some
types of protective coatings. Test on an
inconspicuous area rst
For: Grease traps, drains, trucks and heavy
equipment, engine parts, tar and
asphalt removal
Dosing: Degreasing: 1:10 (rinse thoroughly),
Industrial equipment: 1:20,
Fragrance: Citrus
VOC regulations apply. See label for minimum
dilution requirement
5
Service That Works... Products That Perform
SHOP SUPPLIES
CUTTING TOOLS
*This kit does not meet the ANSI 2015 Safety Standards
Part No. Description
Box
Qty
865.1105 Plastic Bandage 16 ct
865.1106 Trauma Pad, 5" x 9" 1 ea.
865.1108 Triangular Bandage, 40" x 40" x 56" 1 ea.
865.1109 Sterile Gauze Pads, 3" x 3" 4 ct
865.1110 Antiseptic Wipes 10 ct
865.1112 Burn Relief 6 ct
865.1113 Cold Pack 4" x 5" 1 ea.
865.1115 Cloth Tape, 1/2"x2.5 yds 1
865.1116 Nitrile Exam Gloves 10 pr
10 PERSON FIRST AID KIT
Treats 10 or more people
71 pieces
Ideal for home, car, or small oce
Part No.
865.1102
Part No.
865.11.008
25 PERSON 16 UNIT FIRST AID KIT
Part No. Description
Box
Qty
865.11.092 CPR Mask, Scissors, Tape Roll 1
865.11.088 First Aid Guide 1
865.11.122 Hand Sanitizer Packets, 0.9g 10
865.1104 Adhesive Fabric Bandages, 1"x3" 16
865.11.299 Triple Antibiotic Ointment Packets, 0.5g 12
865.11.093 BZK Antiseptic Towelettes 10
865.11.121 First Aid/Burn Cream Packets, 0.9g 12
865.11.120 Burn Dressing, 4"x4" 1
865.11.087 Cold Pack, 4"x5" 1
865.11.094 Nitrile Exam Gloves 4
865.11.157 Sterile Gauze Pads, 3'x3" 4
865.11.086 Triangular Bandage, 40"x40"x56" 1
865.1114 1 Eyewash, 1oz w/2 Eye Pads and Strips 1
865.1106 Trauma Pad, 5"x9" 2
865.11.526 Conforming Gauze Rolls, 2" 2
KIT CONTENTS
Qty. Description
1 Plastic Case 9” x 8-3/8” x 2-1/2”
1 Disposable Gown with Full Sleeves
2 Disposable Shoe Covers
1 Eye Shield with Ear Loop Mask
2 Exam Quality Vinyl Gloves, 1 pair
1 Red Z Fluid Solidier, 21 gram
1 Biohazard Scoop with Scraper
2 15”x 24” Biohazard Bags, 5 gal. capacity
2 Clear Bags with Twist Ties
3 Disposable Clean-up Towels
3 Antiseptic Cleansing Wipes (sting free)
2
5” x 8” Germicidal Wipe (kills germs),
covers 7.5 sq. ft.
1 Bodily Fluid Pick-Up Guide
ABRASIVES
Part No.
Dia. X Thickness
X Arbor Hole Grade Brand Type
886.27.36 4-1/2” x 1/8” x 7/8” Duo Disc Pferd 27
886.27.38 4-1/2” x 1/8” x 5/8”-11 Duo Disc Pferd 27
886.87757 4-1/2” x 5/64” x 7/8” A46 Metabo 27
886.87761 5” x 5/64” x 7/8” A46 Metabo 27
886.87762 6” x 5/64” x 7/8” A46 Metabo 27
886.27.37 5” x 1/8” x 7/8” Duo Disc Pferd 27
886.27.39 5” x 1/8” x 5/8”-11 Duo Disc Pferd 27
COMBO GRINDING AND CUTTING WHEELS
Cutting, deburring, light grinding without changing wheels
Combination abrasive wheel is a cost-ecient and technically
advanced solution
Suitable for both cutting and grinding of Steel and Stainless Steel
NPT Threads
High Quality Carbon Steel
NPT threads
High-speed Moly/
Tungsten steel
Gold nish
PIPE TAPS 
HIGH SPEED STEEL
NPT Threads
High Speed Steel
DRILL SIZES FOR PIPE TAPS
Part No. Size
661.25.18 1/8-27
661.25.14 1/4-18
661.25.38 3/8-18
661.25.12 1/2-14
661.25.34 3/4-14
661.25.1 1-11-1/2
661.25.114 1-1/4-11-1/2
661.25.112 1-1/2-11-1/2
661.25.2 2-11-1/2
Part No. Size
661.39.116 1/16-27
661.39.118 1/8-27
661.39.14 1/4-18
661.39.38 3/8-18
661.39.12 1/2-14
661.39.34 3/4-14
661.39.1 1
661.39.114 1-1/4-11-1/2
661.39.112 1-1/2-11-1/2
Taper Pipe
NPT + NPTF
Drill
Size
Decimal
Equivalent
1/8-27 R .3390
1/4-18 7/16 .4375
3/8-18 37/64 .5781
1/2-14 45/64 .7031
3/4-14 59/64 .9219
1-11-1/2 1-5/32 1.1562
1-1/4-11-1/2 1-1/2 1.5000
1-1/2-11-1/2 1-47/64 1.7344
2-11-1/2 2-7/32 2.2188
PIPE TAPS
PIPE TAPS 
CARBON STEEL
Part No. Size
661.50.18 1/8-27
661.50.14 1/4-18
661.50.38 3/8-18
661.50.12 1/2-14
661.50.34 3/4-14
661.50.1 1-11-1/2
661.50.114 1-1/4 -11-1/2
661.50.112 1-1/2 -11-1/2
ADJUSTABLE PIPE DIES
NPT Threads
High Quality Carbon Steel
Part No. Size
666.01.18 1/8-27
666.01.14 1/4-18
666.01.38 3/8-18
666.01.12 1/2-14
Part No.
865.1090
Designed to provide personal protection during
biohazard clean-up
Kit meets federal OSHA recommendations
Reusable plastic case can be easily carried or
mounted on a wall
BLOODBORNE PATHOGEN
BODILY FLUID SPILL KIT
ANSI 2015 Compliant
Carry handle or wall mountable
Treats 25 people
84 pieces
Single use packaging
6
Service That Works... Products That Perform
FLUID POWER
An excellent heavy-duty cutting machine
A portable saw that can cut all hoses, including
wire-reinforced
Includes three abrasive blades
3 1/2 H.P. Motor
110/115 Volts, 15 Amp
HOSE CUTTING MACHINE
ZSERIES TOOLING KITS
Collet Description Adapter Spacer Ring Description
ET425DC-4Z 4Z Braided Collet ET425AR-14 ET425SR-105A H180 Ring
ET425DC-6Z 6Z Braided Collet
ET425DC-8Z 8Z Braided Collet
ET425DC-12Z 12Z Braided Collet
ET425DC-16Z 16Z Braided Collet
ET425DC-4S8 4S8 Spiral Collet
ET425DC-4S12 4S12 Spiral Collet
ET425DC-4S16 4S16 Spiral Collet
ET425DC-420 4S420 Spiral Collet
T420TP1001 CRIMP KIT CONVERSION
T420, T480
Part No.
897.480.1
KIT INCLUDES:
ET1000TP1001 CRIMP KIT CONVERSION
ET1000
Part No.
897.1000.1
KIT INCLUDES:
Collet Description Spacer Ring Description
ET313DC-4Z 4Z Braided Collet ET313SR-090A H180 Ring 4,6,8
ET313DC-6Z 6Z Braided Collet ET425SR-150A H180 Ring 12,16
ET313DC-8Z 8Z Braided Collet
ET1000DC-12Z 12Z Braided Collet
ET1000DC-16Z 16Z Braided Collet
ET313DC-4S8 4S8 Spiral Collet
ET1000DC-4S12 4S12 Spiral Collet
ET1000DC-4S16 4S16 Spiral Collet
ET4001TP1001 CRIMP KIT CONVERSION
ET4000, ET4001
Part No.
897.440.1
KIT INCLUDES:
Collet Description Spacer Ring Description
ET525DC-4Z 4Z Braided Collet ET525SR-120A H180 Ring
ET525DC-6Z 6Z Braided Collet ET575SR-135A H43032 Ring
ET525DC-8Z 8Z Braided Collet
ET525DC-12Z 12Z Braided Collet
ET525DC-16Z 16Z Braided Collet
ET525DC-4S8 4S8 Spiral Collet
ET525DC-4S12 4S12 Spiral Collet
ET525DC-4S16 4S16 Spiral Collet
ET525DC-4S20 4S420 Spiral Collet
ET575DC-4S24 4S24 Spiral Collet
ET575DC-4S32 4S32 Spiral Collet
Collet Description Adapter Spacer Ring Description
ET313DC-4Z 4Z Braided Collet ET400AR-10 ET313SR-090A H180 4-8 Ring
ET313DC-6Z 6Z Braided Collet ET400SR-180A H180 12-16 Ring
ET313DC-8Z 8Z Braided Collet ET400SR-280A H280 12-16 Ring
ET400DC-12Z 12Z Braided Collet
ET400DC-16Z 16Z Braided Collet
KIT INCLUDES:
T400TP1001 CRIMP KIT CONVERSION
T400, T460, T462, T465
Part No.
897.400.1
ET313DC-4Z
ET313DC-6Z
ET313DC-8Z
ET400DC-12Z
ET400AR-10
ET313SR-090A
ET400SR-180A
ET400SR-280A
ET400DC-16Z
(shown left)
*Sold Separately
Part No. Collet Description
897.313.015 ET313SR-015A Spacer Ring
897.313.030 ET313SR-030D Spacer Ring
897.313.10 ET313DC-10Z 10Z Braided Collet
STAINLESS STEEL
DIAL CALIPER
Big 6” measuring capacity and reads to 0.001”
Easy to read and shockproof
Capable of four-way measurement; inside, outside, depth and step
Comes in an impact resistant, hard plastic case for protection
Part No.
980.2284
Part No.
897.0.60
7
Service That Works... Products That Perform
AUTOMOTIVE
ASSORTMENTS
Used on domestic vehicles equipped with alloy rims
that were manufactured prior to 1995
Fits many brands like Acura, Buick, Chevrolet,
Chrysler, Dodge, Inniti, Isuzu, Lexus, Oldsmobile
and Pontiac
AW” SERIES
Part No.
Weight
oz.
834.20.025 0.25
834.20.050 0.50
834.20.075 0.75
834.20.100 1.00
834.20.125 1.25
Part No.
Weight
oz.
834.20.150 1.50
834.20.175 1.75
834.20.200 2.00
834.20.225 2.25
834.20.250 2.50
“FN” SERIES
Part No.
Weight
oz.
834.11.010 10
834.11.015 15
834.11.020 20
834.11.025 25
834.11.030 30
834.11.035 35
Used on most Japanese vehicles equipped with
alloy wheels
Fits many brands like Acura, Honda, Infiniti, Lexus,
Nissan and Toyota
Part No.
Weight
oz.
834.11.040 40
834.11.045 45
834.11.050 50
834.11.055 55
834.11.060 60
“IAW” SERIES
Part No.
Weight
oz.
834.215.010 10
834.215.015 15
834.215.020 20
834.215.025 25
834.215.030 30
834.215.035 35
Used on many new Ford models, on most European
vehicles and certain Asian vehicles equipped with
alloy wheels
Fits many brands like UDI, BMW, Cadillac, Jaguar, Kia,
Nissan, Toyota, Volkswagen and Volvo
Part No.
Weight
oz.
834.215.040 40
834.215.045 45
834.215.050 50
834.215.055 55
834.215.060 60
“MC” SERIES
Part No.
Weight
oz.
834.23.025 .25
834.23.050 .50
834.23.075 .75
834.23.100 1.00
834.23.125 1.25
Used on most domestic vehicles equipped with alloy
rims. The MC series is the most sold and installed steel
series wheel weight for alloy rims
Fits many brands like Buick, Chevrolet, Chrysler, Dodge,
Ford, Mazda, Oldsmobile, Pontiac and Saturn
Part No.
Weight
oz.
834.23.150 1.50
834.23.175 1.75
834.23.200 2.00
834.23.225 2.25
834.23.250 2.50
The most common weight for steel wheels. Will t
standard-width rim ange thickness passenger car steel
wheels with 13”-17” wheel size
Fits standard-width rim ange thickness passenger car
steel wheels
“P” SERIES
Part No.
Weight
oz.
834.10.025 .25
834.10.050 .50
834.10.075 .75
834.10.100 1.00
834.10.125 1.25
Part No.
Weight
oz.
834.10.150 1.50
834.10.175 1.75
834.10.200 2.00
834.10.225 2.25
834.10.250 2.50
Used on most domestic light trucks equipped with
decorative and larger thickness steel wheels and most
light trucks equipped with alloy wheels
Fits steel wheels with a thicker than standard rim ange
and light trucks with non-commercial alloy rims
“T” SERIES
Part No.
Weight
oz.
834.24.025 .25
834.24.050 .50
834.24.075 .75
834.24.100 1.00
834.24.125 1.25
Part No.
Weight
oz.
834.24.150 1.50
834.24.175 1.75
834.24.200 2.00
834.24.225 2.25
834.24.250 2.50
PERFECT COATED STEEL WHEEL WEIGHTS
FLUID POWERWEATHERHEAD HYDRAULIC
5
897.660.44
5
897.66 0.86
5
897.668.46
3
897.668.1616
3
897.662.1616
3
897.665.1212
3
897.664.1212
3
897.661.66
5
897.660.46
5
897.660.88
5
897.668.66
5
897.662.44
5
897.665.44
3
897.665.1616
3
897.664.1616
3
897.661.88
5
897.660.64
5
897.660.1212
5
897.668.68
5
897.662.46
5
897.665.46
5
897.664.44
3
897.676.44
5
897.660.66
3
897.660.1616
5
897.668.88
5
897.662.88
5
897.665.68
5
897.664.66
3
897.676.66
5
897.660.68
5
897.668.44
3
897.668.1212
3
897.662.1212
5
897.665.88
5
897.664.88
3
897.661.44
Part No. Pieces
972.8976 155
Contains: Z series hose ends
Size Range: 1/4” - 1”
Bin Dimensions:
33-3/4”W x 23-7/8”H x 12”D
Bin Part No. 953.540
This assortment also available
without the bin under
part no.
973.8976
973. Assortments Do Not ship with bin labels
METAL
WEATHERHEAD HYDRAULIC  COLLOCRIMP
Z SERIES WITH METAL BIN
4060 E Plano Parkway
Plano, Texas 75074
800-527-4126
www.winzer.com
Copyright © 2019 Winzer
SERVICE THAT WORKS®
SERVICE THAT WORKS®
Ed. 19 Vol. 4
Part No. Description
897.1001 ET1000 - Basic Machine only, (No Pump)
897.1002 ET1000 - Machine with hand pump*
897.1003 ET1000 - Machine with air/hydraulic pump*
897.1004 ET1000 - Machine with 110v electric pump*
897.1000.01
ET1000 - Adapter Ring req’d to use ‘U’ and ‘Z’
collets
897.1000.1 ET1000 - ‘Z’ Series Tooling Kit
*Tooling sold serarately
Uses Standard Coll-O-Crimp 1 Collets and Spacer Rings for U-Series ttings
Note: Tooling sold separately: (See item list below)
Collets: 897.2, 897.3, 897.4, 897.5, 897.6, 897.7.0, 897.8
Spacer Rings: 897.9, 897.10, 897.18
Capacity: 1/4-1-1/4” 2wire hose ber braid through 2” ‘U’ and ‘Z’ 3/8-3/4 4-wire hose ‘430U’.
*Includes hose assembly and ttings to attach pump to machine
This complete portable crimp machine boasts a broad crimp capability with an ease-of-use
that is sure to please
Three power source options make this crimper able to travel to the worksite. Machine comes
predrilled to be mounted to a workbench or table top
ET1000
5
674.01.2
5
674.01.4
5
674.01.6
5
674.01.8
5
674.02.2
5
674.02.4
5
674.02.6
5
674.02.8
5
674.03.2
5
674.03.4
5
674.03.6
5
674.03.8
5
674.06.2
5
674.06.4
5
674.06.6
5
674.06.8
5
674.07. 2
5
674.07. 4
5
674.07. 6
5
674.07. 8
5
674.10.42
5
674.10.62
5
674.10.64
5
674.10.86
5
674.12.22
5
674.12.44
5
674.12.66
5
674.12.88
5
674.13.22
5
674.13.44
5
674.13.66
5
674.13.88
5
674.11.22
5
674.11.44
5
674.11.66
5
674.11.88
5
674.16.2
5
674.16.4
5
674.16.6
5
674.16.8
5
674.04.22
5
674.04.42
5
674.04.44
5
674.04.64
5
674.04.66
5
674.04.84
5
674.04.86
5
674.04.88
5
674.05.42
5
674.05.62
5
674.05.64
5
674.05.82
5
674.05.84
5
674.05.86
5
674.08.2
5
674.09.215
5
674.09.220
5
674.09.225
5
674.08.4
5
674.09.415
5
674.09.420
5
674.09.425
5
674.08.6
5
674.09.615
5
674.09.620
5
674.09.625
5
674.08.8
5
674.09.820
5
674.09.825
5
674.09.830
Contains: Brass Pipe Fittings and Nipples
Size Range: 1/8”, 1/4”, 3/8”, and 1/2”
Bin Dimensions:
Uses (2) 40 Compartment Bins,
each 33-3/4”W x 23-7/8”H x 12”D
Bin Part No. 953.540
This assortment also available
without the bin under
part no. 973.674
973. Assortments Do Not ship with bin labels
METAL
Part No. Pieces
972.674 350
BRASS FITTING  BRASS PIPE WITH 2 METAL BINS